⚠️ Audi manufacturer position

Follow erWin fuel supply repair group; drain before tank drop.

Vehicle information

MakeAudi
ModelQ5
Market statusSold new in the US 2009–present
Body stylesCompact luxury SUV
Generations8R, FY (2018–present), next gen 2025+
Engine optionsGasoline: 2.0L TFSI, 3.0L V6
Diesel: 3.0L TDI (US years limited)
Hybrid: Q5 PHEV (US)
Fuel tank capacity18.5–19.8 gal
Fuel systemGasoline DI; TDI common-rail where equipped
Access methodPump module access from cargo floor — erWin by model year
Anti-siphonYes
Service portalAudi erWin / ELSA

Misfuel risk High

Q5 TDI at passenger diesel pumps—gasoline nozzle mis-selection is a known US failure mode.

If the engine was not started

Tow; no ignition ON.

If the engine was started

TDI high-pressure hardware inspection mandatory.

Access procedure

  1. Disconnect battery ground strap; ignition OFF.
  2. Briefly open and close fuel door to relieve capless system pressure if equipped.
  3. Release fuel pressure per erWin/ELSA (relay or scan tool—avoid cranking with wrong fuel).
  4. Access fuel pump module (often under rear seat or cargo floor) per model erWin group.
  5. Drain tank using VW-approved fuel cart connected at module service ports.
  6. Replace fuel filter; inspect low-pressure and high-pressure components per contamination severity.
  7. Reinstall, reconnect battery, prime system, leak-check, and clear adaptations if required.

Related models

Frequently asked questions

What should I do if I put the wrong fuel in my Audi Q5?

Do not start the engine or cycle the ignition to RUN if the fuel pump may prime. Have the vehicle recovered to a USIFDA Certified Repair Facility and follow Audi service information for tank draining and fuel system inspection.

Does Audi warranty cover misfuel damage on a Q5?

No. Audi warranties exclude damage from improper or contaminated fuel. Repairs are typically customer-pay; document the OEM-prescribed remediation procedure.

Can fuel be removed from a Q5 through the filler neck?

Audi documents fuel recovery via the fuel pump module access and/or tank removal using approved equipment—not filler-neck siphoning. Follow ISTA/TIS or erWin procedures for your model year.

Need professional misfuel recovery?

Find a certified operator or read consumer guidance for your next steps.

Find an operator Consumer guidance

← Back to Audi models